Battery powered spit motor

Battery powered spit motor

800,00kn

SKU: 2012.
Categories: , .

Planetary gear motor with a reducer, with a battery case, 6 RPM + RPM regulation through an adapter, torque power: 50kg, with an adapter…

PRODUCT DESCRIPTION

Standard motor with longer casing and pre-installer 8AA batteries battery holder.

Planetary gear motor installed in an inox casing is a highly demanded product. Besides being used as a spit motor, these motors are well made for various purposes such as improvised machines, commercial rotators etc. The motor is small in dimensions but big in power. There’s no overheating because it’s run on lower electricity. It doesn’t require much electricity, only up to 650 mA per hour. RPM can be regulated with an adapter. By turning the RPM down, you will also turn down the motor’s voltage.
Motor comes in an inox casing - 42mm diameter, casing length: 150mm.

In this set, you’ll find a planetary gear engine with an appropriate AC/DC adapter, and 1.2A cable with clamps.

Motor characteristics:

  • 6 RPM
  • Torque: 8  Nm
  • Turning strength: up to  50 kg
  • Required electricity: 650 mAh
  • Plug dimensions: 5.5x2.1mm
  • Total dimensions: : Ø 42x150mm

AC/DC adapter characteristics:

  • INPUT: AC 100-240V 50-60Hz
  • OUTPUT: DC 3-12V, 1200mA
  • 1.5m cable
  • Plug: 5.5 x 2.1mm

A CASE WITH A PRE-INSTALLED BATTERY HOLDER

  • Case length: 30cm
  • Suitable for 8AA batteries
  • ON/OFF switch
  • Adapter socket
  • Turned thread cover

Weight: approx. 1,2kg

Delivery time: 24 hours (using HP-Express)

Weight 1.5000 kg


    [recaptcha size:compact]